T-Railer
A Semi for the Railway
T-Railer - A Semi for the Railway
The Dymax T-Railer is the world's most versatile low bed equipment transporter. You can pull it on the highway and quickly load on rail in minutes. Not only can you haul machinery to and from remote work sites but also allow excavators to work from the T-Railer while on the rails. Dymax T-Railers are truly the semi-trailer for the rails. The T-Railer is attached to the goose-neck of the semi-truck and pulled down the highway until it reaches the single road crossing. Then the T-Railer is unhitched from the semi-truck positioned 90 degrees and placed down on the rails. New off-track wheel drive system allows you to get on and off track at crossings without using a semi-truck. Ballast spreader efficiently places material where needed.
Moving You Foward!
You can spread ballast, haul drainage pipes, poles, panels, ties and all of your equipment...in the rain, heat or snow. The self-contained Cummins engine on the T-Railer then takes over to move the T-Railer down the rails with equipment from excavators to ballast trucks to snow removal equipment, etc. Your imagination allows you to think of many options. Cummins engine provides the power to move the T-Railer down the track as well as provide power for the implements.
Engineered to Haul 100,000 lbs.
Dymax T-Railers are engineered tough to haul up to 100,000 lbs on rail.
| Model | T-Railer 65K | T-Railer 100K |
|---|---|---|
| Platform Width on rail with swingouts in (mm) |
126 (3200) | 126 (3200) |
| Platform Width on road in (mm) |
101.75 (2584) | 101.75 (2584) |
| Platform Height off rail in (mm) |
28 (711) | 32 (812) |
| Total Weight lb (kg) |
33,000 (14969) | 38,000 (17237) |
| Load Capacity lb (kg) |
65,000 (29484) | 100,000 (45360) |
| Road Hauling Gear Systems | Single Rear Dolly | Tandem Axle with Detach Gooseneck |
| Engine | Cummins 120HP | Cummins 200HP |
| FRA Regulations | Complies | Complies |
| Travel Speed mph (kmh) |
20 (32) | 20 (32) |
| Options | Dymax Ballast Hopper Truck Dump Style |
Off Track Systems Knuckle Boom Cranes |
| Ramps | Hydraulic | Hydraulic |
| Turntable | Hydraulic | Hydraulic |
| Decking | Hardwood | Hardwood |
Dymax T-Railers are made to order. If you require special requirements, please let us know and we can customize a T-Railer machine for you.
Want to share your feedback?
Email us"DymaxRail has many satisfied customers. If you're one of them and would like to comment here, write or give us a call."
- Clark Balderson, CEO Dymax Inc.
"We've worked with railroads and equipment dealers around the world. If you'd like to hear their stories, give us a call."
-Allen Switzer, North America Sales Manager DymaxRail
402 Miller Drive
PO Box 267
Wamego, KS 66547
USA
Worldwide: 1-785-456-2081
Fax: 1-785-456-8328
Email: sales@DymaxRail.com
Skype: DYMAXinc
Sales, Service, Product Support
Scott Balderson | Vice President
Arrived at Dymax in 1997 along with his father Clark. Grew up in and around the Balderson Inc. offices and plant in Wamego, Kansas. Scott brings to Dymax lessons learned from his father and grandfather about customer service, straight forward business dealings and attention to details.
Allen Switzer | North America Sales Manager
Began his career in the construction equipment industry at Balderson Inc. as a sales rep. Opened Balderson offices in Europe and later named Balderson General Sales Manager. After Caterpillar purchased Balderson, Allen became Work Tools Commercial Manager and transferred to the Singapore Caterpillar headquarters where he managed the commercial New Product Introduction (NPI) development of the work tools market in China, South Asia and Australia.
Curtis Haefner | Sales Representative
Joined Balderson Inc. in 1979. He spent nearly 20 years with Balderson Inc. as a draftsman at the Wamego, Kansas location and in Belgium at Balderson Europe Curtis arrived at Dymax in 1998 and spent 4 years in the engineering department prior to his move to Sales. His product knowledge makes him one of the most versatile salesmen in the attachment industry.
Carl Williams | Sales Coordinator
Joined Dymax in 2003 as a welder. Grew up on a farm in Chase County, KS where he developed a superior work ethic, broad machine knowledge and attention to detail. Carl joined the Dymax sales team in June 2008 and has been on the go ever since.
Kip Campbell | Product Support & Service Coordinator
Joined Dymax in the summer of 1999 as a welder. With more than 10 years of hands-on experience building Dymax products, in 2009 became Product Support & Service Coordinator. Kip brings a wealth of mechanical and technical expertise to supporting Dyamx products worldwide.
Chris Holle | Customer Service, Sales Support, Technology
Chris started work at Balderson Inc. in 1978 when he was only 16. He had an in: Chris' father was Balderson executive Chuck Holle and his grandfather was Willard Balderson. For many years he served as computer systems manager at Balderson Inc. Chris brings his computer skills and his life-long involvement with specialty attachments to Dymax.
Sarah Desmet | Marketing & Sales Systems Coordinator
After living in Costa Rica, joined Dymax in 2010 with the goal to finally work for a company that "really makes things." With 20-years experience in sales and marketing in the finance and technology industries, Sarah helps drive Dymax's domestic and international sales and marketing programs.
